- 100% waterproof system
- Lightweight in comparison to other similar panel products
- Green alternative to polymer-boards
- Minimal maintenance
- Easy to install
An abstract design, our industrial inspired Iron Oxide décor is made for the contemporary bathroom.
With an authentic stone texture, this laminate offers a unique palette of grey and rust tones, ideal for use as a feature wall.
Available in either a square edge or tongue and groove finish, Nuova wall panel products are supplied class 2 fire rated as standard; however, they can be tailored for Class 1 or Class 0 if required.
Want to try out your new real stone look ahead of purchase? Make use of our free laminate samples service to test out our wall panels at home.
Delivered within two to five working days via Royal Mail, our A7 laminate chips allow you to get a feel for our stone effect panels, texture and colour.
Are faux stone panels waterproof?
Yes, our Nuova laminate stone effect wall panels are 100% waterproof.
Manufactured in-house by our team of highly skilled craftsmen, our wall panels offer a unique foam blend core that is completely non-porous and a greener alternative to similar polymer-based boards.
At its last assessment, Nuova has lasted over five years completely submerged in water with no damage or delamination.
How authentic are your real stone effect wall panels?
To achieve any of our stone effect details we scan physical real stone offcuts to create our decorative sheets, our 3D textures are then created via various craft paper and resin techniques.
This means that we can guarantee an authentic stone texture being delivered straight to your door.
What are the advantages of panelling?
A modern alternative to tiles, wall panels offer many benefits for your bathroom project.
Not only are they waterproof, as mentioned above, but they are also quick to install and easy to clean.
Creating your dream bathroom can be done in a matter of hours with shower panels, thanks to the large surface area that they cover and their simple install system.
Another benefit of this is the reduced labour and material cost.
And, once fitted, stone effect panels require minimal maintenance. Just a wipe down with a cloth and mild detergent will remove any residue from this luxury surface.
Which edge should I select for my project?
Both edges offer the same quality, however it is the scale of your bathroom project that may dictate your choice.
Square edge panels are clean cut and must be joined via trims (found within our bathroom accessories section), these are most typically used to complete shower areas. Please select our Selkie/ Ancona trims for Nuova products.
Meanwhile, Tongue and Groove panels are designed to slot in seamlessly to each other, allowing for panels to be applied to larger wall spaces without disruption.
Please note: During a Tongue & Groove panel installation, Nuova colour match sealant must be used on all joints.
How do I install stone effect bathroom panels?
Beginning in the corner of your bathroom, shower panels can be easily installed to wall areas with the assistance of panel adhesive, silicone and a panel trim.
There are a wide range of corner and edging trims available to finish your panels to perfection. Choose from a satin anodised, white powder coated, black powder coated or a luxury polished aluminium effect to achieve your perfect finish.
For any Nuova project, select our Selkie/Ancona range trims. These can be found in the Accessories section of this website - click on the Wall Board Trims category.
Your process will then vary depending on the size of the space you are planning to fit your panels too.
Examples: For a 2 panel corner sited shower you will require: 1 Internal Corner and 2 End Cap trims. For a 3 panel 'U' shaped enclosure you will require: 2 Internal Corners and 2 End Caps.
You may also want to consider using a Panseal Kit, also available in the Accessories section, to seal the bottom joint between panels, bath edges and shower trays.
Many fitters prefer to sit the panels onto the shower tray and use silicone to seal, but as it is essential to prevent water ingress we recommend using the Panseal Kit to give you a better, longer lasting seal with a cleaner, more aesthetic finish.
For further information regarding any of our bathroom wall panels, please get in touch with a member of our customer service team.
Available Monday - Thursday (8:00am til 4:30pm) and Friday (8:00am til 3:30pm) via email@example.com or phone 0141 440 0800.